RAL 110-M vs RAL 860-M
RAL 110-M and RAL 860-M come from the same RAL Effect collection. Both sit in the grey family, which is useful context if you're narrowing within a single hue direction. Their light reflectance values are nearly the same — 36 vs 36 — so neither will read significantly brighter or darker than the other. A ΔE of 2.8 puts them in subtle territory — distinguishable in direct comparison, less so from across a room. Below you'll find 4 real-room photo comparisons where both colors appear side by side, plus 5 simulated room previews.
RAL 110-M vs RAL 860-M in Real Spaces
4 real rooms side by side. RAL 110-M and RAL 860-M are close enough that the difference can be hard to judge from a chip alone — these photos show how each reads at scale, across different spaces and lighting conditions.
Living Room
A living room wall sees more varied light than almost any other surface in the house, which makes the choice between these two more nuanced than a chip suggests. At this scale the difference is subtle — you'd need them side by side, as shown here, to reliably tell them apart.
Kitchen
Kitchens often have the harshest, most revealing light in the house — under-cabinet LEDs and overhead fixtures that strip away subtlety. In photos like these you're seeing the difference at its most direct. In a finished room, the distinction is there but not dramatic.
Bathroom
Small bathrooms intensify color. A shade that seems quiet in a larger room can feel immersive when you're surrounded by it on four walls. In photos like these you're seeing the difference at its most direct. In a finished room, the distinction is there but not dramatic.
Kitchen Cabinets
Cabinet color is always seen in context — against countertops, backsplash, and hardware — which amplifies undertone differences that might disappear on a plain wall. In photos like these you're seeing the difference at its most direct. In a finished room, the distinction is there but not dramatic.
Color Details
RAL 110-M vs RAL 860-M Simulated Comparison
5 simulated room previews — drag the slider on each to see RAL 110-M on one side and RAL 860-M on the other.
Digital color is approximate. These simulations are generated from the manufacturer's hex values and overlaid on grayscale room photos — your screen's calibration, brightness, and viewing angle all affect how they render. Before committing to either color, test physical samples in your own space under the light you actually live with.
More RAL 110-M comparisons
See how RAL 110-M stacks up against other well-photographed colors across different brands and tones.
White Dove reflects far more light (LRV 83 vs 36), opening up a space where RAL 110-M encloses it.
At LRV 52 vs 36, Purbeck Stone is decisively the brighter choice.
A 6-point LRV gap (36 vs 30) makes RAL 110-M the marginally brighter of the two.
At LRV 60 vs 36, Agreeable Gray is decisively the brighter choice.
Accessible Beige reflects far more light (LRV 58 vs 36), opening up a space where RAL 110-M encloses it.
RAL 110-M reads slightly lighter (LRV 36 vs 27), a gap that shows most in low-lit rooms.
A 7-point LRV gap (43 vs 36) makes French Gray the marginally brighter of the two.
Tranquil Dawn reflects far more light (LRV 55 vs 36), opening up a space where RAL 110-M encloses it.
Hardwick White reads slightly lighter (LRV 44 vs 36), a gap that shows most in low-lit rooms.
At LRV 84 vs 36, Pure White is decisively the brighter choice.
Balboa Mist reflects far more light (LRV 66 vs 36), opening up a space where RAL 110-M encloses it.
Shoji White reflects far more light (LRV 74 vs 36), opening up a space where RAL 110-M encloses it.
RAL 110-M reflects far more light (LRV 36 vs 12), opening up a space where Pewter Green encloses it.
RAL 110-M reflects far more light (LRV 36 vs 8), opening up a space where Duck Green encloses it.
Skimming Stone reflects far more light (LRV 68 vs 36), opening up a space where RAL 110-M encloses it.
RAL 110-M reflects far more light (LRV 36 vs 12), opening up a space where Vintage Vogue encloses it.
Saybrook Sage reads slightly lighter (LRV 45 vs 36), a gap that shows most in low-lit rooms.
A 5-point LRV gap (36 vs 31) makes RAL 110-M the marginally brighter of the two.